Not ready for a board like this… or maybe you don’t want to break your boards like Burkhart?! These will help you display your boards on your wall until you’re ready! These are simple mounts that utilize the existing holes for the trucks. No modification to your skate deck needed!!

• 3” 10-32 studs (which is the size of the mounting hardware for the trucks) go through the truck mounting holes at 1.625” center to center that fits old school and new school decks

• The supplied black nylon 10-32 nuts adjust to set the depth from the wall and then top it off with the supplied 10-32 black nylon cap nut

• Black nylon nuts are used to protect the deck and not mar or leave indentions into the skateboard like steel hardware. Hand tighten the nylon nuts and cap nuts. No tools are required to put the skate board on the mount. Finished results are a floating skateboard deck that is UNREAL wall art!
  (Skateboard Decks can be mounted vertically or horizontally. If mounting horizontally two mounts per board is needed. If mounting vertically only one mount per board is necessary. When mounting vertically with one mount the board just barely touches the wall at the bottom. If you use two mounts vertically it will "float" off the wall top and bottom)

• Skate deck mounts come assembled as shown in pictures and ready to hang. They do NOT come in several bags you have to assemble your self taking extra time!

• Sheetrock Screw: #8 Black Screw to be used with the supplied Sheetrock Anchor. (1) 3/16” drill bit RECOMMENDED for wall anchor installation into wall.

• Made in the U.S.A.